#Separation studio 4 registration marks how to#

This is an average halftone setting for screen printing. A frequency of 30 will create 30 dots per inch for that specific color separation. In the Advanced Separations Settings window, uncheck all the colors except for blue and set the Frequency column to 30.Go to the Separations tab and click the Advanced button in the Options.The blue color in this job includes tints (the grey areas in the preview), so we need to set some advanced settings for that color to produce halftones or tints of that color. Click Apply so that these settings will be remembered for this job if you close the Print Preview window.It will help you find issues before you print. Preflight tab – Check this last tab for any warnings when all your settings are set.If you need an enlarged view of the separation click on the Print Preview Close out of this by clicking the Close Print Preview icon on the top toolbar or press CTRL + C. Use the arrows or dropdown list under the print preview to scroll through each separation. The Preview window on the right will give you the visual of what each separation looks like.

Select one or more if they are ready to print by turning on or off the Include check box.

Separations tab- This is where all the color separations are listed.

PostScript tab – You can adjust postscript settings here.

A common setting used in screen printing would be to Mirror the image, under Paper/ film settings.

Prepress tab – Most settings can usually be OFF unless you know you need them.

You can set imposition here if you need it.

Layout tab – Leave Image position and size set to As in document.

Color tab – beside Color choose Separations.

General tab – set the Print range to Current page.

Here are some settings on the various tabs in the Print window to get familiar with: The small print preview window will be interactive as options are changed in the tabs of the Print window. The visual nature of this window will give you clear view of what is being printed. Next, click the 2 black arrows beside the Print Preview button in the bottom left corner. Normally you need a postscript output device selected to be able to see all these options. This choice will show us all the options for printing separations. For tutorial purposes, I am choosing DEVICE INDEPENDENT POSTSCRIPT FILE. The next very helpful tool for printing separations is inside the actual print window. With this setting on, you are less likely to waste films, screens or paper. Click the checkbox for Print only current page and click OK. Go to Tools > Options > Global and select Printing in the left column. So, to make sure we only print from the active page you can modify a setting inside the CorelDRAW options. When printing separations only the active page is usually being printed.

For extra organization in your file, you can label the page the color being printed by right-clicking on the name of the page. For the white ink base, you would print it from this page. For example, page 2 in the exercise file has the base white separation. You can use another page for these modified versions of the artwork. Sometimes screen-printed separations need trapping or a base color for printing. If you drag the registration mark to your document palette or a custom palette, it will add the color to your palette to have it easily available whenever you need. If you click the drop-down arrow in this window and look at the bottom of the list, you will see the registration color. Select a registration mark, then double-click the Outline settings in the bottom right of the interface. You can drag this color to the document palette or a custom palette for easy access. This color is good for job names and registration marks to keep them consistent on all films or screens. If you use the registration color for these marks it will show up on each separation without having to change the color. When printing screen-printed separations, you can add your own custom registration marks on the page so you can control where they are on the output. They are labeled with a name, so you know exactly which separation or color plate you are printing. Think of it like a coloring book and each color crayon you color with or use from the spot color palette is a separation. In some printing processes that use spots color, like screen printing, you need to isolate each color into individual color areas so they can be printed on the same plate or screen.

#Separation studio 4 registration marks how to#

You will learn how to manage some of the settings inside CorelDRAW that will help you feel confident that when you hit “print” you will get exactly what you wanted in your output. In this tutorial you will learn about printing color separations.